现在这个社会消防泵的应用越来越广泛，被应用到很多消防行动和企业也被很多人所熟悉，可是关于9大消防泵常见问题与方法大家可能还不是很了解，下面川消厂家小编就和大家说一下，让您对它的了解更深。

Now the application of fire pump in this society is more and more extensive, and it has been used in many fire actions and enterprises and is also familiar to many people. However, you may not know much about the common problems and solutions of the nine fire pump. Now let's talk about it in a small edition of Sichuan Fire Pump Factory to let you know more about it.

1、叶轮或管线受堵

1. Impeller or pipeline blocked

措施：检查有无障碍物。

Elimination measures: Check for obstacles.

2、系统水头太高

2. System head too high

措施：检查系统的水头(特别是磨擦损失)。

Elimination measures: Check the water head of the system (especially the friction loss).

3、无液体提供，供给液体不足或压力不足，没有注水或没有适当排气。

3. No liquid supply, insufficient liquid supply or pressure, no water injection or proper exhaust.

措施：检查消防泵壳和入口管线是否全部注满了液体。

Elimination measures: check whether the fire pump shell and inlet pipeline are all filled with liquid.

4、吸程太高

4. Suction head too high

措施：检查现有的净压头(入口管线太小或太长会造成很大的磨擦损失)。

Elimination measures: Check the existing net pressure head (if the inlet pipeline is too small or too long, it will cause significant friction loss).

5、速度太低

5. Speed too low

措施：检查电机的接线是否正确，电压是否正常或者透平的蒸汽压力是否正常。

Elimination measures: Check whether the wiring of the motor is correct, whether the voltage is normal, or whether the steam pressure of the turbine is normal.

6、抽送热的或挥发性液体时吸入水头不足

6. Insufficient suction head when pumping hot or volatile liquids

措施：增大吸入水头，向厂家咨询。

Elimination measures: Increase the suction head and consult the manufacturer.

7、产生空气或入口管线有泄漏

7. Air generation or leakage in the inlet pipeline

措施：检查入口管线有无气穴或空气泄漏。

Elimination measures: Check the inlet pipeline for air pockets or air leaks.

8、转动方向不对

8. Wrong rotation direction

措施：检查转动方向。

Elimination measure: Check the direction of rotation.

9、填料函中的填料或密封磨损，使空气漏入消防泵壳中。

9. The packing or seal in the stuffing box is worn, making air leak into the fire pump shell.

措施：检查填料或密封并按需要更换，检查润滑是否正常。

Elimination measures: Check the packing or seal and replace it as needed, and check if the lubrication is normal.

经过小编的介绍相信您对我们公司http://www.cx-fire.com的消防泵更有了了解，希望这次介绍会对您有帮助，以后小编会继续补充关于消防泵的知识敬请期待吧。

After the introduction of the editor, I believe you have a good understanding of our company http://www.cx-fire.com I hope this presentation will be helpful to you. In the future, I will continue to supplement my knowledge about fire pump.