川消_萃联
气体灭火系统
自动喷水灭火系统

联系我们

  • 萃联(山东)消防设备有限责任公司
  • 电话:15508683119
  • 地址:山东省济南市历城区祝舜路44号
当前位置:首页 > 新闻中心消防水泵安装前先了解怎样的注意事项?

消防水泵安装前先了解怎样的注意事项?

来源:http://www.cx-fire.com/ 日期:2022-06-27

消防水泵安装在固定灭火系统或其他消防设施上,但有时因为消防施工员的疏忽,防水泵出现漏水的情况,为了避免此类事情的发生,我们在进行这一系列消防工程安装施工时应该先了解一些安装注意事项。
The fire pump is installed on the fixed fire extinguishing system or other fire-fighting facilities, but sometimes the waterproof pump leaks due to the negligence of the fire constructor. In order to avoid such things, we should first understand some installation precautions during the installation and construction of this series of fire-fighting works.
1.水泵安装前核对水泵实际安装尺寸与安装图是否相符。
1. before installing the water pump, check whether the actual installation dimension of the water pump is consistent with the installation drawing.
2.水泵机组就位安装前水泵及电动机应检查,看是否符合设计要求和其产品说明书的规定。
2. before the water pump unit is installed in place, the water pump and motor shall be checked to see whether they meet the design requirements and the provisions of the product manual.
3.对基础外观进行检查,不能有裂纹、空洞、露筋等缺陷。
3. check the appearance of the foundation to ensure that there are no cracks, cavities, exposed reinforcement and other defects.
4.检查基础的尺寸位置、标高是否符合设计要求,设备的零部件是否有缺件、锈蚀。盘车应灵活无阻滞、卡住现象、无异常声音。
4. check whether the size, position and elevation of the foundation meet the design requirements, and whether the parts of the equipment are missing or corroded. The turning gear shall be flexible without blocking, jamming and abnormal sound.
5.产品出厂时装配、调试完善的部分不应随意拆卸。确需拆卸时;应会同厂方、建设方、监理方研究后进行。拆卸和复装应按设备的技术文件规定进行。
5. the parts equipped and debugged when the product leaves the factory shall not be disassembled at will. When it is necessary to disassemble; It shall be carried out after studying with the manufacturer, the owner and the supervisor. Disassembly and reassembly shall be carried out in accordance with the technical documents of the equipment.
川消
6.水泵机组外观完好,无损伤,漆层剥脱落现象;泵体和电机上必须有出厂铭牌;在施工安装时要采取措施保护铭牌;防止磨损和脱落。
6. the appearance of the water pump unit shall be intact without damage, and the paint layer shall be free of peeling off; The pump body and motor must have factory nameplate; Take measures to protect nameplate during construction and installation; Prevent abrasion and falling off.
7.水泵机组安装在建筑地下室底层;其出水管;进水管上应安装柔性。
7. the water pump unit is installed at the bottom of the basement of the building; Its outlet pipe; Flexible shall be installed on the inlet pipe.
川消小编提醒大家,消防工程安装关系到人们的生命,所以,在施工时,一定要做好相关工作,确保可靠性。
Chuanxiao Xiaobian reminded everyone that the installation of fire engineering is related to people's life safety. Therefore, relevant work must be done well during construction to ensure safety and reliability.
以上就是问题解答的相关内容了,希望能够帮助到大家,如对这一问题还存在任何疑问,都欢迎关注我们网站http://www.cx-fire.com并咨询我们的工作人员,将竭诚为您服务。
The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.cx-fire.com And consult our staff, will serve you wholeheartedly.
以上就是问题解答的相关内容了,希望能够帮助到大家,如对这一问题还存在任何疑问,都欢迎关注我们网站http://www.cx-fire.com并咨询我们的工作人员,将竭诚为您服务。
The above is the relevant content of the question answer. I hope it can help you. If you have any questions about this problem, you are welcome to follow our website and consult our staff. We will serve you wholeheartedly.
上一篇:认识消防软管从喷枪、软管两方面开始
下一篇:川消讲解多种消防设备维修知识参考

相关产品 / Related products