消火栓箱在我们生活中是非常普遍的，也是非常重要的防护设备，在各个建筑里都可以看到消火栓箱的身影。消火栓箱可以说是火灾发生的时候灭火和逃生的主要工具，所以需要对消火栓箱进行日常的维护，下面川消小编来为您讲讲。

Fire hydrant boxes are very common and important protective equipment in our life. Fire hydrant boxes can be seen in all buildings. The fire hydrant box can be said to be the main tool for extinguishing and escaping in the event of a fire. Therefore, it is necessary to carry out daily maintenance on the fire hydrant box. The following is a brief introduction by Chuanxiao Xiaobian.

川消消火栓箱的主要用途

Main uses of Chuanxiao fire hydrant box

消火栓箱是用来装各种消防设备的地方，一般来说，消火栓箱的箱体都是用钢材轧制而成，外部都是经过防锈漆或者是干燥处理，这样才能确保消火栓箱的性，消火栓箱内配有室内消火栓，直流水枪软管和软管接头以及消防按钮等。

The fire hydrant box is used to install various fire-fighting equipment. Generally speaking, the box of the fire hydrant box is made of rolled steel, and the outside is subject to anti rust paint or drying treatment, so as to ensure the safety of the fire hydrant box. The fire hydrant box is equipped with indoor fire hydrant, DC water gun hose, hose connector and fire button.

目前室内的消火栓箱的外形都是非常美观的，采用的都是单门双门豪华组合箱结构，这样非常便于使用，可以说它是高层或者是大型建筑工程以及公共场所发生火灾之后扑灭火初期火灾的有效消防设施。

At present, the appearance of indoor fire hydrant boxes is very beautiful, and the structure of single door and double door luxury combination box is adopted, which is very easy to use. It can be said that it is an effective fire extinguishing facility for high-rise or large-scale building projects and public places to extinguish the initial fire after a fire occurs.

目前的消火箱和灭火器都是由钢板压制而成的，他们的涂层表面都比较光滑，有很强的附着力，小伙，雅香采用的是新型的铝合金框架，他的面板一般都是磨砂玻璃。

At present, the fire extinguisher and fire extinguisher are all made of steel plate. Their coating surfaces are smooth and have strong adhesion. Young man, Yaxiang uses a new aluminum alloy frame, and his panels are generally frosted glass.

消火栓箱的使用方法

Use method of fire hydrant box

消火栓箱的维护

Maintenance of fire hydrant box

1、在使用之后，一定要在水管完全干燥之后装入消火栓内，而且水枪应该固定好，消火栓内应该保持干净整洁，如果有破碎玻璃，应该及时更换。

1. After use, the water pipe must be installed in the fire hydrant after it is completely dry, and the water gun should be fixed. The fire hydrant should be kept clean and tidy. If there is broken glass, it should be replaced in time.

2、消火栓箱内部和正面一定要保持干燥和清洁，这样才能有效地防止里面的软管发霉，防止消防栓受到腐蚀。

2. The inside and front of the fire hydrant box must be kept dry and clean, so as to effectively prevent the hose inside from becoming moldy and prevent the fire hydrant from being corroded.

3、单位和个人应该定期对消防栓进行检查和维护，要确保消防栓没有泄露现象，确保阀门应用自如灵活，确保水枪和水龙带完好无损，没有任何剥落的现象。

3. Units and individuals shall regularly inspect and maintain the fire hydrants, ensure that there is no leakage of the fire hydrants, ensure that the valves can be applied freely and flexibly, and ensure that the water guns and hoses are intact without any peeling.

当火灾发生的时候，要根据消火栓箱门的开启方式，打开厢门，查一下水枪拉动软管，同时要将软管接口和消火栓接口连接起来，有拉动箱体内的电源开关，然后开启方向旋松室内消火栓的手轮，这样可以喷水灭火。以上所讲希望对大家有一点帮助，更多了解关注我们http://www.cx-fire.com！

In case of fire, open the door of the fire hydrant box according to the opening mode of the fire hydrant box door, check that the hose is pulled by the water gun, connect the hose interface with the fire hydrant interface, pull the power switch in the box, and then open the direction to loosen the hand wheel of the indoor fire hydrant, so as to spray water. I hope the above will help you a little, and learn more about us http://www.cx-fire.com ！