电控消防水炮在现实生活中的使用您知道包含哪些内容吗？只有对此问题进行充足的了解，才能更好的将工作顺利进行下去。下面川消小编为您讲解。

Do you know what is included in the safe use of electric control fire monitor in real life? Only by fully understanding this problem can we carry out the work smoothly. Now let's talk about it.

1、电动消防炮在使用前应先检查控制器电源电路和无线摇控接收设备,保证电流电压在正常范围内.摇控器内电池电量正常。

1. Before using the electric fire monitor, check the power circuit of the controller and the wireless remote control receiver to ensure that the current and voltage are within the normal range and the battery power in the remote control is normal.

2、保持消防炮体清洁，使用泡沫灭火后应用清水冲洗干净。

2. Keep the fire monitor clean, and wash it with clean water after using foam to extinguish the fire.

3、定期在黄油嘴处及转动部位加注润滑脂，保证转动灵活。

3. Fill grease at grease fitting and rotating part regularly to ensure flexible rotation.

4、若发现喷射压力过高或射程较近时，应检查喷头处是否有赌塞物，若有应及时。

4. If it is found that the injection pressure is too high or the range is too short, check whether there is any gambling plug at the nozzle, and if there is, remove it in time.

5、在安装消防炮前，须对管路进行冲洗，以防杂物进入消防炮堵塞喷头。

5. Before installing the fire monitor, the pipeline must be flushed to prevent sundries from entering the fire monitor and blocking the nozzle.

6、各部件应保持完好，如果发现紧固件松动，应及时修复。

6. All parts shall be kept in good condition. If any fastener is loose, it shall be repaired in time.

7、若消防炮使用很长时间后，应对表面进行相应的处理。

7. If the fire monitor is used for a long time, the surface shall be treated accordingly.

8、进入冬季，应把消防炮内残留的水放掉，以免冻裂炮身。

8. In winter, the residual water in the fire monitor should be drained to avoid freezing and cracking the gun body.

9、消防炮在使用时应尽量在顺风的工况下使用。

9. The fire monitor shall be used in downwind condition as far as possible.

电控消防水炮要懂得如何使用，在使用过后应该要进行维护以防出现问题。以上就是这些的介绍，欢迎大家前来http://www.cx-fire.com咨询相关信息。

The electric control fire monitor should know how to use it, and should be maintained after use to prevent problems. These are the introductions. Welcome to come http://www.cx-fire.com Ask for relevant information.