很多地方，消防泵不同一般的设备，不需要每天运作。只是在关键的时候，如火灾来临之时，才会被开启。那么，就会经常发现这样的问题，这样的现象每年都会发生。那么，消防泵管道无水，主要问题在于哪里呢？川消小编为您讲解。

In many places, fire pumps are different from ordinary equipment and do not need to be operated every day. It will only be turned on at critical times, such as when a fire is coming. Then, we will often find such problems, which occur every year. Then, the fire pump pipeline has no water. What is the main problem? Sichuan Xiaobian explains it to you.

消防泵管道无水，多半是压力出了问题！

There is no water in the fire pump pipeline. Most of the problems are caused by the pressure!

一、速度小，可能是因为电机接线不正确，或蒸汽压力不正常而引发的转速小，导致压力不足无法抽水。

1、 Low speed, which may be caused by incorrect motor wiring or low speed caused by abnormal steam pressure, resulting in insufficient pressure and inability to pump water.

二、消防泵忘记注水或没有适当排气。

2、 The fire pump forgot to inject water or did not exhaust properly.

三、消防泵吸程太高。

3、 The suction head of the fire pump is too high.

四、闲置过久的消防泵部分零件出现损坏，如叶轮受损、叶轮间隙变大、管线受堵、压力表位置偏移、入口管线出现有泄漏、润滑油不够等。

4、 Some parts of the fire pump that have been idle for too long are damaged, such as damaged impeller, larger impeller clearance, blocked pipeline, offset of pressure gauge position, leakage of inlet pipeline, insufficient lubricating oil, etc.

五、消防泵的底阀或入口管浸没深度不够。

5、 The immersion depth of the bottom valve or inlet pipe of the fire pump is not enough.

消防泵压力不足，引发消防泵管道无水，在消防问题上，可大可小。为此，川消小编特别提醒，在购买优良消防泵之时，也不忘消防泵的保养工作。更多相关内容就来我们网站http://www.cx-fire.com咨询了解吧！

The pressure of fire pump is insufficient, causing no water in the fire pump pipeline, which can be large or small in terms of fire safety. For this reason, the Sichuan Xiaobian specially reminds that when purchasing excellent fire pumps, they should not forget the maintenance of fire pumps. More relevant content will come to our website http://www.cx-fire.com Ask and understand!