When using water type fire extinguisher, it does not need to be inverted, has long effective time, is resistant to re ignition and double fire extinguishing. The surface of the object will not be polluted after fire extinguishing, and local water-based fire extinguishers can reduce the harm to human body.

水基灭火器存在缺陷与干粉灭火器相比，水基灭火器重量较重，货架期短于干粉灭火器。干粉灭火器可保存10年，水基灭火器可保存6年。而且水基灭火器的比传统的干粉灭火器贵，100以内可以买到，100以内可以买到

Compared with the dry powder fire extinguisher, the dry powder fire extinguisher has shorter shelf life. Dry powder fire extinguishers can be stored for 10 years and water-based fire extinguishers can be stored for 6 years. Moreover, the price of water-based fire extinguishers is more expensive than traditional dry powder fire extinguishers. You can buy them within 100 and within 100

消火栓主要适用于初始火灾时不易复燃的火源。消火栓可用于固体物质火、易燃液体火、可燃电器火、厨房油火等。可用于家庭、汽车、商务办公等场合，实用性好。

The fire hydrant is mainly applicable to the fire source that is not easy to re ignite in the initial fire. Fire hydrants can be used for solid fire, flammable liquid fire, combustible electrical fire, kitchen oil fire, etc. It can be used in family, automobile, business office and other occasions with good practicability.

对于水基灭火器来说，它也是一种常见的灭火器，比干粉灭火器更好，只会更贵，应用范围比干粉灭火器窄，是水基灭火器的优缺点和应用范围知识。根据以下规定，灭火器的外观标志应合格：

For water-based fire extinguisher, it is also a common fire extinguisher. It is better than dry powder fire extinguisher and will only be more expensive. Its application range is narrower than dry powder fire extinguisher. It is the advantages, disadvantages and application range of water-based fire extinguisher. The appearance mark of the fire extinguisher shall be qualified according to the following provisions:

消火栓上有发光标记，没有明显的缺陷和损坏，消火栓的位置可以消火栓的位置

There are luminous marks on the fire hydrant without obvious defects and damage. The position of the fire hydrant can be the same as that of the fire hydrant

检查灭火器标志和铭牌的主要内容，包括灭火器名称、型号、灭火剂类型、灭火等级、灭火类型、使用温度、驱动气体名称和数量（压力）、制造企业名称、使用方法、再填充和日常维护。贴花平服，不脱落，不缺边少字，无明显褶皱，气泡等缺陷。

Check the main contents of fire extinguisher signs and nameplates, including fire extinguisher name, model, fire extinguishing agent type, fire extinguishing grade, fire extinguishing type, service temperature, driving gas name and quantity (pressure), manufacturer name, use method, refilling and daily maintenance. The decal is flat, without falling off, missing edges and words, and without obvious wrinkles, bubbles and other defects.

长时间识别灭火器底圈或颈圈等无压部位的水压试验压力和生产日期，钢印用于生产连续序号。

Identify the hydrostatic test pressure and production date of the non pressure parts such as the bottom ring or neck ring of the fire extinguisher for a long time, and the steel seal is used for the production of continuous serial numbers.

通过对二氧化碳灭火剂在瓶体上的肩部进行打孔，使钢印清晰，排列整齐，成扇形排列，钢印标记标注内容齐全

Through punching the shoulder of carbon dioxide fire extinguishing agent on the bottle body, the steel seal is clear, neatly arranged in a fan-shaped arrangement, and the marking contents of the steel seal are complete

●灭火器压力指示板上有灭火剂使用标志(如水基灭火剂用S指示、干粉灭火剂用F指示、洁净气体灭火剂用J指示)；指示区和黄区分别标有重新充装和超充b)手推式灭火器采用旋转式枪械，枪身上有久标志，表明开启方法外型检测主要是检测灭火器及其附件的机械加工质量、外型涂层质量、贴花质量，盐城消防器材使用目测检测灭火器外型涂层和电镀件的表面质量。灭火器及其附件符合下列要求的外观质量检验判定为合格不存在明显缺陷和机械损伤，如灭火器筒及其挂钩、支架等。产品外观涂层颜色均匀，无裂纹、流痕、气泡、划痕、划痕等现象；灭火器电镀表面无气泡、划痕、划痕等现象。

● the fire extinguisher pressure indicator board is marked with the use of fire extinguishing agent (e.g. s for water-based fire extinguishing agent, f for dry powder fire extinguishing agent and j for clean gas fire extinguishing agent); The indication area and the yellow area are marked with refill and overcharge respectively. B) the hand push fire extinguisher adopts a rotary gun, and there is a long-term mark on the gun body, indicating that the appearance detection of the opening method is mainly to detect the machining quality, appearance coating quality and decal quality of the fire extinguisher and its accessories. Yancheng fire fighting equipment uses visual inspection to detect the surface quality of the appearance coating and electroplated parts of the fire extinguisher. The appearance quality inspection of the fire extinguisher and its accessories meeting the following requirements is determined to be qualified, and there are no obvious defects and mechanical damage, such as the fire extinguisher barrel, its hook, support, etc. The product appearance and coating color shall be uniform without cracks, flow marks, bubbles, scratches, scratches and other phenomena; The electroplated surface of the fire extinguisher shall be free of bubbles, scratches, scratches and other phenomena.

今日就是小编为大家带来的精彩内容，更多的精彩内容关注我们的网站：川消http://www.cx-fire.com

Today is the wonderful content that Xiaobian brings to you. More wonderful content focuses on our website: Chuanxiao http://www.cx-fire.com