我们经常会有患得患失的情况，对于厂房，仓库来说，需要保护厂房，仓库的产品和设备，现阶段使用川消消防水炮是较为理想的消防防火、灭火产品，但是在水炮调试的情况下会出现各种常见的问题。这种患得患失的情况下，该怎么做呢？

We often have a situation of worrying about gains and losses. For factories and warehouses, it is necessary to protect the product and equipment safety of the factories and warehouses. Currently, using the Sichuan Fire Water Cannon is an ideal fire prevention and extinguishing product, but various common problems may arise during the debugging of the water cannon. What should we do in this situation of worrying about gains and losses?

01

01

有火源出现，水炮却没有反应时，应及时查看有没有拆除火灾探测器（红外，紫外）的保护罩。

When a fire source appears but the water cannon does not respond, it is necessary to promptly check if the protective cover of the fire detector (infrared, ultraviolet) has been removed.

02

02

水炮能发现火源，却对不准位置射水时，应分别对水炮的安装高度、垂直方向、水平方向、定点时间等进行系统参数调节

When the water cannon can detect the source of fire but shoots water from an inaccurate position, the system parameters such as the installation height, vertical direction, horizontal direction, and fixed point time of the water cannon should be adjusted separately

03

03

没有火源出现，水炮却在自行启动时，要查看现场周围是否有红紫外干扰源，应对系统的红紫外灵敏度进行设置。

When there is no fire source present but the water cannon is starting on its own, it is necessary to check if there are any red and ultraviolet interference sources around the scene and set the red and ultraviolet sensitivity of the system.

04

04

水炮控制器开机后，却发现“主电输出”灯不亮时，应检查机器内为水炮供电的空气开关是否为开启状态，检查链接空气开关的连接线是否有断开。

When the water cannon controller is turned on but the "main power output" light is not on, it is necessary to check whether the air switch supplying power to the water cannon in the machine is in an open state and whether the connecting wire to the air switch is disconnected.

05

05

水炮控制的液晶不显示时，应检查液晶与显示板是否连接完好，检查背光插头是否插好。

When the LCD controlled by the water cannon does not display, it should be checked whether the LCD is properly connected to the display board and whether the backlight plug is plugged in properly.

06

06

水炮控制的键盘失效时，应检查软面板插排是否完好，或可以重新查一下。

When the keyboard of the water cannon control fails, it should be checked whether the soft panel plug is intact, or it can be rechecked.

07

07

水炮控制无音响出现时，应检查扬声器插头是否插好，或可以重新插一下。

When there is no sound in the water cannon control, it is necessary to check whether the speaker plug is properly plugged in, or it can be reinserted.

08

08

水炮控制器回路出现短路时，应检查回路总线，排查是否是短路。

When there is a short circuit in the water cannon controller circuit, the circuit bus should be checked to see if it is a short circuit.

现在的智能化产品的智能程度比较高，如果担心设备稳定性，那么可以对设备进行多方面了解，及时检查设备，消防水炮在国内走过了很长的低谷期，现在水炮性能已经稳定，出错概率非常小，反而作用越来越大。更多相关事项就来咨询我们http://www.cx-fire.com吧！

The current level of intelligence in intelligent products is relatively high. If you are concerned about the stability of the equipment, you can have a comprehensive understanding of the equipment and timely check the equipment. The fire water monitor has gone through a long period of decline in China, and now the performance of the water monitor is stable, with a very small probability of error, but the effect is becoming increasingly significant. Please consult us for more related matters http://www.cx-fire.com Come on!