安装使用七氟丙烷灭火装置需要注意哪些事项？

来源：http://www.cx-fire.com/ 日期：2024-03-22

可以说七氟丙烷灭火系统在我国众多领域都得到了广泛的使用。七氟丙烷灭火系统作为哈龙灭火剂的替代产品拥有着许多的优点，可以说为保护人民群众的生命财产奉献了很大的力量。尽管有着这么多的优点，但是在安装及使用七氟丙烷灭火装置的过程中仍然有着许多需要大家注意的事项。只有了解这些注意事项才能更好地使用七氟丙烷。

It can be said that heptafluoropropane fire extinguishing systems have been widely used in many fields in China. The heptafluoropropane fire extinguishing system, as an alternative product to halon fire extinguishing agents, has many advantages and can be said to have contributed greatly to protecting the safety of people's lives and property. Despite having so many advantages, there are still many things to pay attention to when installing and using heptafluoropropane fire extinguishing devices. Only by understanding these precautions can we better use heptafluoropropane.

1、灭火装置在运输过程中应轻装轻卸，严禁碰撞、卧置或倒置。

1. Fire extinguishing devices should be loaded and unloaded with care during transportation, and collision, lying or inversion are strictly prohibited.

2、灭火剂储瓶避免接近热源，防止太阳直晒，并保持干燥和通风良好。

2. Fire extinguishing agent storage bottles should be kept away from heat sources, protected from direct sunlight, and kept dry and well ventilated.

3、拆装过程中应避免碰伤装置表面而影响外观。

3. During disassembly and assembly, avoid damaging the surface of the device and affecting its appearance.

4、无关人员禁止乱摸乱碰本装置的各部件，以免发生意外。

4. Unauthorized personnel are prohibited from touching or touching various components of this device to prevent accidents.

5、装置安装调试的人员，应熟悉本装置的基本结构、工作原理、性能和动作的程序，以及各部件的基本结构和工作状态。

5. The personnel responsible for device installation and debugging should be familiar with the basic structure, working principle, performance, and action program of the device, as well as the basic structure and working status of each component.

6、日常保养和维护应严格按照操作程序，防止灭火剂误喷。

6. Daily maintenance and upkeep should strictly follow operating procedures to prevent accidental spraying of fire extinguishing agents.

7、防护区空气中不应含有易燃、导电尘埃及腐蚀部件的有害物质，否则必须加以保护，装置也不能受到震动和冲击。

7. The air in the protective zone should not contain flammable, conductive dust, or harmful substances that corrode components, otherwise it must be protected, and the device must not be subjected to vibration and impact.

8、装置喷射灭火剂前，所有人员必须在延时期内（0-30S可调）撤离火情现场，灭火完毕后，必须启动风机，将废气排出后，人员才可进入现场。

8. Before spraying the fire extinguishing agent, all personnel must evacuate the fire scene within a delay period (adjustable from 0 to 30 seconds). After extinguishing the fire, the fan must be started first to discharge the exhaust gas before personnel can enter the scene.