川消_萃联
气体灭火系统
自动喷水灭火系统

联系我们

  • 萃联(山东)消防设备有限责任公司
  • 电话:15508683119
  • 地址:山东省济南市历城区祝舜路44号
当前位置:首页 > 新闻中心消火栓箱的基本配置和分类介绍

消火栓箱的基本配置和分类介绍

来源:http://www.cx-fire.com/ 日期:2024-04-25

1、基本配置

1. Basic configuration

其实在遇到火灾发生的时候,需要根据相应的方式打开消火栓箱,但前提是必须要了解一下这样的一个设备,都有一些什么样的基础部分所组成。就是有麻质衬胶水袋通常长度是20米到25米之间。紧接着还有水枪消火栓,以及指示红灯报警按钮,跟着就是的消防软管卷盘。这些部分才组成了一个完整的消火栓箱。

In fact, when encountering a fire, it is necessary to open the fire hydrant box according to the corresponding method, but the prerequisite is to understand what basic components are composed of such equipment. Firstly, water bags with linen lining are usually between 20 and 25 meters in length. Next, there are water guns and fire hydrants, as well as red light alarm buttons, followed by the fire hose reel. These parts form a complete fire hydrant box.

2、分类

2. Classification

其实消火栓箱如果要做分类的话,总共可以分为很多种分类的标准也不同,如果是按照安装方式,它可以分为明装,暗装,半暗装。如果是要按照他的门型做划分,又可以分为又开门,是佐开门,是双开的,还有前后开的。当然,绝大多数情况下,他的分类基本上都是按照材料来划分的比方说,铝合金的,钢框玻璃型的等等,都是常见的一些组装材料。

In fact, if the fire hydrant box needs to be classified, it can be divided into many categories with different standards. If it is installed according to the installation method, it can be divided into open installation, concealed installation, and semi concealed installation. If it is to be divided according to its door type, it can be divided into double opening, auxiliary opening, double opening, and front and rear opening. Of course, in the vast majority of cases, his classification is basically based on materials, such as aluminum alloy, steel frame glass type, etc., which are common assembly materials.

20230920055944624.jpg

3、检验

3. Inspection

由于这种设备是属于消防系统的设备,所以在检验上面会更加的严格一些,关于这方面的检验标准有相关的条例和准则,就是材料,不管是什么材料制作都必须要满足防火,其次就是能够抵挡住各种风吹日晒,因为消火栓箱有的时候也是安装在室外的,所以面对的环境可能比较恶劣。内部的检验就更加严格了,毕竟是直接参与到救火活动中,如果不合格就会直接造成财产和人身伤害。

Due to the fact that this type of equipment belongs to the fire protection system, the inspection will be more strict. There are relevant regulations and guidelines regarding the inspection standards in this regard. Firstly, the materials must meet the fire prevention requirements regardless of their production. Secondly, they must be able to withstand various wind and sun exposure. Because fire hydrant boxes are sometimes installed outdoors, the environment they face may be harsh. The internal inspection is even stricter, as it directly participates in firefighting activities. If it fails, it will directly cause property and personal injury.

本文由川消友情奉献.更多有关的知识请点击:http://www.cx-fire.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is dedicated by Chuanxiao Youqing. For more related knowledge, please click: http://www.cx-fire.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned

上一篇:川消:消防设备的主要种类和功能
下一篇:消防信号闸阀的构造以及材质要求

相关产品 / Related products