灭火系统在扑救固体可燃性火灾中起灭火、防火、阻隔、降温、防暴、防火等作用。同时不会引起液体起火具有高飞溅、高电绝缘的特点，特别适用于扑救电气设备和易燃液体引起的火灾，保护工厂、、仓库、配电室、大型变压器。而消防水雾喷头是自动喷水灭火系统中的重要部件。那么消防水雾喷头的结构特点及维护价值

The fire extinguishing system plays the role of fire extinguishing, fire prevention, blocking, cooling, riot prevention and fire prevention in fighting solid combustible fires. At the same time, it will not cause liquid fire. It has the characteristics of high splash and high electrical insulation. It is especially suitable for extinguishing fires caused by electrical equipment and flammable liquids and protecting factories, shopping malls, warehouses, distribution rooms and large transformers. The fire spray nozzle is an important part of the automatic sprinkler system. Then the structural characteristics and maintenance value of fire spray nozzle

消防水雾喷头的结构特点

Structural characteristics of fire spray nozzle

水雾喷头结构的工作原理：水雾喷头结构喷出的细水雾的形状围绕着喷头。对于扩轴锥体，消防水雾喷头结构的雾化角为锥顶角。 在一定水压的作用下，直流水通过离心搅拌或冲击原理分解成小水滴并喷出。

Working principle of water mist nozzle structure: the shape of fine water mist ejected from the water mist nozzle structure surrounds the nozzle. For the expanding cone, the atomization angle of the fire water spray nozzle structure is the cone apex angle. Under the action of certain water pressure, the direct water is decomposed into small water droplets and ejected through centrifugal stirring or impact principle.

水雾喷头结构在安装时可根据要求下垂或水平安装。消防水雾喷头结构外观比较精致，机身主要采用铜合金材料，非常耐用的。水雾喷头结构入口可根据使用的具体需要设置过滤网。在一定的水压条件下，消防水雾喷头的结构将水流迅速分解成纳米级细水雾滴并喷出。

The water mist nozzle structure can be installed sagging or horizontally according to the requirements. The structure and appearance of the fire spray nozzle are relatively exquisite. The body is mainly made of copper alloy, which is very durable. Filter screen can be set at the inlet of water mist nozzle structure according to the specific needs of use. Under certain water pressure, the structure of fire water mist nozzle quickly decomposes the water flow into nano water mist droplets and ejects them.

覆盖保护对象的外表面以促进蒸气的稀释和散发。 因此，消防水雾喷头的结构可用于抑制火灾，减少火灾灾害破坏并降低爆炸风险。 消防喷头通常用于可燃液体火灾、固体火灾和电气火灾，以及保护性冷却等。

Cover the outer surface of the protected object to promote the dilution and emission of steam. Therefore, the structure of fire spray nozzle can be used to suppress fire, reduce fire disaster damage and reduce explosion risk. Fire sprinkler is usually used for combustible liquid fire, solid fire and electrical fire, as well as protective cooling.

消防水雾喷头的维护价值

Maintenance value of fire spray nozzle

川消水雾喷头的主要作用是加强防火，如果缺乏日常维护，其灭火效果就会降低。的日常维护需要注意以下几个方面。由于目前的消防设备是由现代计算机自动操作的，因此需要的技术人员。一些不的维修人员可能会因对消防设备不熟悉而造成维修不足。建立健全维修制度。维修人员必须建立维修档案，每一个更换的零件都要有记录。此外，值班人员还应检查设备是否有故障，消防水源是否正常。

The main function of Chuanxiao water mist nozzle is to strengthen fire prevention. If there is no daily maintenance, its fire extinguishing effect will be reduced. Professional routine maintenance needs to pay attention to the following aspects. Since the current fire-fighting equipment is operated automatically by modern computers, professional technicians are needed. Some unprofessional maintenance personnel may be unfamiliar with fire-fighting equipment and cause insufficient maintenance. Establish and improve the maintenance system. Maintenance personnel must establish maintenance files and keep records of each replaced part. In addition, the personnel on duty shall also check whether the equipment is faulty and whether the fire water source is normal.

当今大多数建筑物中的防火设备会随着时间的推移而老化，严重影响可靠性、可用性和有效性。这也是近年来火灾事故频发的原因之一。大家都认为，消防水雾喷头只有在关键的时候才会使用，而且通常是放置在那里而不进行维护和检查。这是一种错误的看法，因为如果没有定期维护，当发生事故时，它可能无法发挥应有的作用。

Nowadays, the fire protection equipment in most buildings will age over time, which seriously affects the reliability, availability and effectiveness. This is also one of the reasons for the frequent occurrence of fire accidents in recent years. It is generally believed that the fire spray nozzle can only be used when it is critical, and it is usually placed there without maintenance and inspection. This is a wrong view, because without regular maintenance, it may not play its due role in case of accident.

消防水雾喷头可以用于电器、液化气罐、石油储罐等场所的冷却、控制和灭火。喷头外观精美，机身采用铜合金材质，经久耐用。喷头可根据需要下垂、水平或任意角度安装，可根据需要安装在喷嘴入口处设置过滤器。更多相关内容就来关注我们网站www.cx-fire.com吧。

Fire water spray nozzle can be used for cooling, control and fire extinguishing in electrical appliances, liquefied gas tanks, oil storage tanks and other places. The appearance of the nozzle is exquisite, and the body is made of copper alloy, which is durable. The nozzle can be installed in sagging, horizontal or any angle as required, and the filter can be installed at the inlet of the nozzle as required. For more information, please visit our website www.cx-fire.com Com.