如果我们仓库的物料很多，为了减少这些产品的损失，我们这里不能着火，我们也建议您选择使用压力比例混合装置进行安装。不过对于没有了解压力比例混合装置的企业来说，还是有一些疑惑，所以这里总结一个比较常见的问题，分享给大家。

If there are a lot of materials in our warehouse, in order to reduce the loss of these products, we can't catch fire here. We also suggest you choose to use the pressure proportional mixing device for installation. However, there are still some doubts for enterprises that do not know about pressure proportioning devices, so here is a common problem to share with you.

安装此设备时，我们必须给它多少空间？其实这应该是很多人在购买这款设备的时候不得不考虑的一个问题，所以在这里我想告诉大家的是，这款设备的大小不用太担心，因为这款产品适合空间要求相对较小。通常我们在选择的时候，这个泡沫箱可能会占用比较大的空间，但是这个是根据我们需要的保护范围来确定的，所以我们在购买的时候等待，您可以根据型号选择。

When installing this device, how much space must we give it? In fact, this should be a problem that many people have to consider when buying this device, so here I want to tell you that there is no need to worry about the size of this device, because this product is suitable for relatively small space requirements. Usually, when we choose, this foam box may take up a large space, but this is determined according to the protection range we need, so we wait when we buy, and you can choose according to the model.

所以当我们选择压力比例混合装置时，不要因为尺寸的问题而阻止我们选择。我们使用此设备来减少财产损失。我们必须记住在此刻。我们之所以选择压力比例混合装置，是因为该装置在使用时发泡剂和水是分开的，每次使用都会混合，这样可以减少我们使用过程中发泡剂的费用。

So when we choose the pressure proportional mixing device, don't stop us from choosing it because of the size. We use this equipment to reduce property damage. We must remember that at this moment. The reason why we choose the pressure proportional mixing device is that the foaming agent and water are separated when the device is used, and it will be mixed every time, which can reduce the cost of foaming agent in the process of our use.

但是川消小编提醒大家要注意的是，每次使用的时候，都要检查一下设备，以便下次更好的使用。通常，我们使用压力比例混合装置后，需要检查设备的阀门是否正常关闭。并且在使用后，我们需要用水来清洗设备中的管道路。虽然设备的管道有相应的保护，但可以减少因使用发泡剂造成的冲刷。但是如果长时间不处理，就会出现问题。

But Chuanxiao Xiaobian reminds everyone to pay attention to the fact that every time you use it, you should check the equipment in order to use it better next time. Usually, after using the pressure proportioning device, we need to check whether the valve of the equipment is normally closed. And after use, we need water to clean the pipeline in the equipment. Although the pipelines of the equipment have corresponding protection, it can reduce the scouring caused by the use of foaming agent. But if it is not handled for a long time, problems will arise.

并且为了减少压力式比例混合装置中使用的发泡剂的问题，灌装时要注意不要将不同种类的发泡剂混合在一起。和储存泡沫时另外，请注意不要暴露在阳光直射下。压力比例混合装置之所以能用得好，对设备的正常运转和对发泡液的产生关重要。所以在使用前后要注意这两点。

And in order to reduce the problem of foaming agent used in the pressure proportional mixing device, attention should be paid not to mix different kinds of foaming agents together during filling. And when storing foam, please pay attention not to be exposed to direct sunlight. The reason why the pressure proportional mixing device can be used well is very important to the normal operation of the equipment and the production of foaming liquid. So pay attention to these two points before and after use.

以上就是问题解答的相关内容了，希望能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站http://www.cx-fire.com并咨询我们的工作人员，将竭诚为您服务。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.cx-fire.com And consult our staff, will serve you wholeheartedly.