灭火设备是我们生活中避免发生火灾的重要的设备，尤其是在一些大型的仓库和当中都需要在规定的范围里设置多个灭火器材，以便与保证人们的生命和财产，减少因火灾发生的经济损失，其中为常用的就是气体灭火系统，下面川消小编就来为您讲解一下。

Fire fighting equipment is an important equipment to avoid fire in our life. Especially in some large warehouses and shopping malls, multiple fire fighting equipment should be set up within the specified range to ensure people's life safety and property safety, and reduce economic losses due to fire. The gas fire extinguishing system is commonly used. The following section of Sichuan Fire Protection Department will explain it to you.

一、安装场所有哪些要求

1、 What are the requirements for the installation site

1、安装环境的温度大概为0~45℃，储存容器需要相对密封，还需保持良好的通风。

1. The temperature of the installation environment is about 0~45 ℃. The storage container needs to be relatively sealed and well ventilated.

2、储藏地的空气中不能含有易燃易爆的分子，否则容易引起爆炸等灾害。

2. The air in the storage area shall not contain flammable and explosive molecules, otherwise it is easy to cause explosion and other disasters.

3、储存气体的容器应该放置在方便人员出入的地方，放置处还应该保持干燥。

3. The gas storage container should be placed in a place convenient for people to access, and the place should also be kept dry.

4、在放置气体灭火系统的时候瓶身框架还要用地脚螺栓进行紧固，方便放置。

4. When placing the gas fire-extinguishing system, the cylinder frame should also be fastened with anchor bolts to facilitate placement.

二、在安装过程中有哪些注意事项

2、 What are the precautions during installation

1、在安装之前需要详细阅读说明书，了解各个零件的相关作用，便于组装。

1. Before installation, you need to read the instructions in detail to understand the relevant functions of each part for easy assembly.

2、设计及气体放置都是根据相关规定的标准进行，灭火系统的安装和运作都是要有的人员进行负责的。

2. The design and gas placement are carried out in accordance with the relevant national standards, and the installation and operation of the fire extinguishing system are the responsibility of professional personnel.

3、在进行灭火器的安装的时候，相关的人员还要对装置的基本机构、工作原理、相关程序进行简单的了解，这样才能够便于安装。

3. When installing the fire extinguisher, relevant personnel should also have a simple understanding of the basic mechanism, working principle and relevant procedures of the device, so as to facilitate the installation.

4、在安装气体灭火系统的泄漏阀部件时，应该安装在启动瓶部件附近，这样才能够保证气体不够泄露出去。

4. When installing the safety leakage valve components of the gas fire-extinguishing system, they should be installed near the starting cylinder components, so as to ensure that the gas does not leak out enough.

5、灭火系统在安装的过程中需要紧闭启动阀，防止发生危险。

5. During the installation of the fire extinguishing system, the starting valve shall be closed tightly to prevent danger.

6、容器阀出口处还要装置帽盖，以来为了在使用过程中避免碰撞，二来方便保证。

6. The outlet of the container valve shall also be equipped with a safety cap to avoid collision during use and to ensure safety.

此外要牢记，气体灭火系统应该避免热源，在运输的时候需要轻拿轻放，避免激烈碰撞，在安装完成以后还要进行相关的调试工作，所有程序正常以后才能投入工作中进行使用。关注我们网站http://www.cx-fire.com，为您讲解更多相关的内容！

In addition, it should be kept in mind that the gas fire extinguishing system should avoid heat sources, handle with care during transportation, and avoid violent collision. After installation, relevant commissioning work should be carried out, and all procedures can be put into operation only after they are normal. Follow our website http://www.cx-fire.com , explain more relevant content for you!