关于泡沫消火栓的特点以及使用方法
来源:http://www.cx-fire.com/ 日期:2023-02-22
消防产品里的泡沫消火栓是很重要的医院,在消防设备中可以针对石油厂、油罐区等危险易燃易爆的液体进行扑灭火的任务。是泡沫灭火系统中的装置之一,适用于大面积有火灾危险的易燃液体和可燃液体的产生,贮存和使用场所。这款
川消泡沫消火栓主要是由法兰、筒体、球阀、内接、消防管牙及端盖所组成。泡沫消火栓适合装备于石油化工企业、炼油厂、贮油罐区、飞机库等重要场所。
The foam fire hydrant in fire protection products is a very important hospital. In the fire protection equipment, it can be used to extinguish the fire of dangerous flammable and explosive liquids such as oil plants and oil tank farms. It is one of the devices in the foam fire extinguishing system, and is suitable for the production, storage and use of large areas of flammable liquids and flammable liquids with fire hazards. This Chuanxiao foam fire hydrant is mainly composed of flange, cylinder, ball valve, internal connection, fire pipe thread and end cap. Foam fire hydrants are suitable for petrochemical enterprises, refineries, oil storage tank farms, aircraft hangars and other important places.
泡沫消火栓特点:
Features of foam hydrant:
快速开关、轻便,是在传统消火栓的基础上有了新的创造性的改进和提高,用下阀板密封,可以借助于介质自身具备的压力密封,压力越高密封越好,特别适用于泡沫消防线上,设计了良好的润滑室:主要部件选用了高耐腐蚀材料、同时主要部件处于油箱内,始终能得到充分的润滑。长时间不用、不保养也不会锈死、卡住。其泡沫混合液开关采用了不锈钢球阀,保证开启自如。
The quick switch and portability is a new creative improvement and enhancement on the basis of the traditional fire hydrant. With the help of the pressure seal provided by the medium itself, the higher the pressure, the better the seal. It is especially suitable for foam fire lines. A good lubrication chamber is designed: the main components are made of highly corrosion-resistant materials, and the main components are located in the oil tank, which can always be fully lubricated. It will not rust or get stuck if it is not used for a long time and not maintained. Its foam mixture switch adopts stainless steel ball valve to ensure free opening.

泡沫消火栓使用方法:
Use method of foam fire hydrant:
将灭火器提到距着火物6米左右,拔出保险销,一手握住开启压把,另一只手紧握喷枪,用力捏紧开启压把,打开密封或刺穿储气瓶密封片,空气泡沫即可从喷枪中喷出。灭火方法与化学泡沫灭火器相同。但与化学泡沫灭火器不同的是,空气泡沫灭火器在使用时,灭火器应当是直立状态的,不可颠倒或横卧使用,否则会中断喷射;也不能松开开启压把,否则也会中断喷射。
Lift the fire extinguisher about 6 meters away from the object on fire, pull out the safety pin, hold the opening handle with one hand, hold the spray gun with the other hand, firmly hold the opening handle, open the seal or puncture the sealing sheet of the gas cylinder, and air foam can be ejected from the spray gun. The fire extinguishing method is the same as that of chemical foam extinguisher. However, unlike chemical foam extinguishers, when using air foam extinguishers, they should be upright and not used upside down or horizontally, otherwise the spraying will be interrupted; Do not loosen the opening handle, otherwise the injection will be interrupted.
Foam fire hydrants sincerely serve new and old users, strictly control the quality of products, do not dare to relax, do your own role, do your own products well, and come to our website if you have relevant doubts or needs http://www.cx-fire.com consulting service