实际上大部分的设备都是需要润滑油进行润滑的，消防泵自然也不看例外，但并不是所有的润滑油都对它有帮助。事实上，泵对润滑油也有一定的要求，下面来看看。

　　In fact, most of the equipment is the need for lubricating oil, fire pump is not an exception, but not all lubricating oil is helpful to it. In fact, the pump also has certain requirements for lubricating oil, let's take a look.

　　消防泵通过机械运动达到增加水压和输送水的目的。和其他机械产品一样，它的工作需要润滑油来提供润滑作用，否则干磨会造成泵故障作为应急设备，有些消防泵长期不工作，所以润滑油对它来说尤为重要。

　　The fire pump achieves the purpose of increasing water pressure and conveying water through mechanical movement. Like other mechanical products, its work needs lubricating oil to provide lubrication, otherwise dry grinding will cause pump failure as emergency equipment, some fire pump does not work for a long time, so lubricating oil is particularly important for it.

　　一个好的泵消耗的润滑油是比较低的，但这也取决于润滑油本身的质量。消防泵润滑油需要根据实际情况更换，原则有哪些？

　　A good pump consumes less lubricating oil, but it also depends on the quality of the lubricating oil itself. Fire pump lubricating oil needs to be replaced according to the actual situation, what are the principles?

　　过滤器切换到容器时，要有一个过滤器来防止杂质残留。规定在泵的润滑部位加油，但不能在其他部位加油。润滑油的质量应保持清洁和无杂质，以防止无序加油或添加变质和不干净的油。应该添加到消防泵额定值，不多也不少。

　　When the filter is switched to the container, have a filter to prevent impurities from remaining. It is stipulated to fuel the pump at the lubricating part, but not at other parts. The quality of lubricating oil should be kept clean and free of impurities to prevent disorderly refueling or adding bad and unclean oil. Should be added to the fire pump rating, no more, no less.

　　山东川消润滑油太少会损害消防泵，润滑油太多会浪费，不利于泵的正常运转。会按照规定时间给泵添加润滑油，避免长期不加油或不必要的频繁加油。定期清洗加油部位。由于泵的磨损和使用中机油的逐渐变质，润滑效果会受到影响。需要定期清洗润滑部位，更换新的润滑油。

　　Too little lubricating oil will damage the fire pump, too much lubricating oil will be wasted, not conducive to the normal operation of the pump. Lubricating oil will be added to the pump according to the specified time to avoid long-term no refueling or unnecessary frequent refueling. Clean the refueling area regularly. Due to the wear of the pump and the gradual deterioration of the oil in use, the lubrication effect will be affected. Need to clean the lubrication part regularly, replace the new lubricating oil.

　　检查和补油方法也要了解到，取出少量的润滑油作为样品和新鲜的润滑油进行比较，有能力的单位可考虑进行油质化验，以确保油质合格。如果样品看似云雾状，那么可能是与水混合的结果，也就是大家常说的油乳化，此时应该更换润滑油。

　　Check and fill oil method also want to understand, take out a small amount of lubricating oil as a sample and fresh lubricating oil for comparison, capable units can consider oil quality test, to ensure that the quality of oil qualified. If the sample looks like mist, it may be the result of mixing with water, which is often referred to as oil emulsification, and the lubricating oil should be replaced at this time.

　　山东川消消防泵的使用离不开润滑油的相关内容便是如此了，如果您有什么问题想知道的话，不如直接来我们网站www.cx-fire.com咨询了解。

　　Shandong Chuan fire pump is inseparable from the use of lubricating oil related content is so, if you have any problems to know, it is better to directly come to our website www.cx-fire.com consultation.