半固定式泡沫灭火装置是一种新型的移动式泡沫灭火装置，也称移动式泡沫灭火装置，操作快捷方便，可靠性强。那么半固定泡沫灭火装置的使用方法以及它的维护保养内容是怎样的呢？

Semi fixed foam fire extinguishing device is a new type of mobile foam fire extinguishing device, also known as mobile foam fire extinguishing device, which is fast, convenient and reliable. What is the use method and maintenance content of the semi fixed foam fire extinguishing device?

半固定式泡沫灭火装置使用方法：

Use method of semi fixed foam fire extinguishing device:

设备一般应由两人操作；一个人接在喷水枪带上，持枪灭火，另一个人接在消火栓软管上，打开消火栓球阀供水。操作步骤如下：

Generally, the equipment shall be operated by two persons; One person is connected to the sprinkler belt to put out the fire with a gun, and the other person is connected to the hose of the fire hydrant to open the ball valve of the fire hydrant to supply water. The operation steps are as follows:

用消防水带将供水源与设备的压力进水口连接起来；

Connect the water supply source with the pressure water inlet of the equipment with a fire hose;

拆下喷枪并展开其消防水带；

Remove the spray gun and unfold its fire hose;

将喷枪的连接软管与设备的出口VI连接起来；

Connect the connecting hose of the spray gun with the outlet VI of the equipment;

打开供水源：

Open the water supply source:

使用泡沫喷枪灭火。

Use a foam spray gun to extinguish the fire.

川消半固定式泡沫灭火装置的维护与保养:

Maintenance of semi fixed foam fire extinguishing device of Chuanxiao:

1）灭火剂的罐装：设备使用后，用户必须购买同类型的泡沫液进行补充罐装；装罐时，可用塑料管吸入或用漏斗从注液口注入；装罐后，拧紧注液口盖,以防止移动设备时泡沫溢出。

1) Canning of fire extinguishing agent: after the equipment is used, the user must purchase the same type of foam liquid for supplementary canning; During canning, plastic pipe can be used for suction or funnel can be used for injection from the liquid injection port; After filling the tank, tighten the filler cap to prevent foam from overflowing when moving the equipment.

2)设备应放置在阴凉、通风、便于取用的地方。

2) The equipment shall be placed in a cool, ventilated and accessible place.

3）本设备罐体材料采用耐腐蚀玻璃钢。严禁使用硬质工具敲击或撞击罐体，造成罐体损坏，造成液体泄漏。

3) The tank body of the equipment is made of corrosion-resistant FRP. It is strictly prohibited to use hard tools to knock or impact the tank, which will cause damage to the tank and liquid leakage.

4）如果设备长期不使用，应每年复查一次泡沫液质量是否变质。如发现变质，应及时更换。

4) If the equipment is not used for a long time, the quality of foam solution shall be rechecked once a year to see if it has deteriorated. If any deterioration is found, it shall be replaced in time.

5)设备每次使用后；在将消防水带缠绕在设备卷盘上之前，应仔细清洁和干燥消防水带。（建议用户自备备用消防水带，以防突发火灾）。

5) After each use of the equipment; The fire hose shall be carefully cleaned and dried before being wound on the equipment reel. (it is recommended that the user should prepare standby fire hose to prevent sudden fire).

6）为了使设备长期处于良好的防火状态和罐内泡沫液的质量；泡沫储罐应每3年打开清洗一次。

6) In order to keep the equipment in a good fire prevention state for a long time and the quality of foam liquid in the tank; The foam storage tank shall be opened and cleaned every 3 years.

7）供水源为电动液压泵或消防水罐车时，供水压力不应大于1.0MPa。购买设备时，应配备能承受工作压力≥1.0MPa的自勺式消防水带。

7) When the water supply source is electric hydraulic pump or fire water tanker, the water supply pressure shall not be greater than 1.0MPa. When purchasing equipment, it shall be equipped with a self scoop type fire hose that can withstand a working pressure ≥ 1.0MPa.

半固定式泡沫灭火装置使用及维护保养的相关内容便是这样了，您可以关注川消网站www.cx-fire.com，了解更多设备的使用。

This is the content related to the use and maintenance of the semi fixed foam fire extinguishing device. You can follow the website www.cx-fire Com to learn more about the use of devices.