使用空气泡沫枪灭火过程中应注意哪些注意事项，以免发生故障和事故？让我们详细介绍下相关内容吧。

What precautions should be paid attention to in the process of extinguishing fire with air foam gun to avoid failures and accidents? Let's introduce the relevant contents in detail.

空气炮泡沫枪是一种能产生并喷射空气泡沫扑灭A、B、C类液体火灾或喷水扑灭一般固体火灾的轻型消防设备。

Air gun foam gun is a kind of light fire-fighting equipment that can produce and spray air foam to extinguish class A, B and C liquid fires or spray water to extinguish general solid fires.

主要由枪管、手轮、枪体、球阀、吸管、KY65喷嘴接口或中岛接头组成；喷嘴用于控制流量和负压，手轮用于控制泡沫枪的喷射方向，枪管用于调节空气泡沫膨胀的动态平衡，密封圈用于密封，枪身为空气泡沫枪的支撑，喷嘴接口用于连接消防水带。

It is mainly composed of gun barrel, hand wheel, gun body, ball valve, suction pipe, ky65 nozzle interface or middle island joint; The nozzle is used to control the flow and negative pressure, the hand wheel is used to control the spray direction of the foam gun, the gun barrel is used to adjust the dynamic balance of air foam expansion, the sealing ring is used for sealing, the gun body is the support of the air foam gun, and the nozzle interface is used to connect the fire hose.

空气炮泡沫枪可通过管齿接口与消防水带接口连接。它通过火压与泡沫液混合，吸入空气产生空气泡沫。空气炮泡沫枪一般和泡沫塞配合使用，也可以用在泡沫卡车上。

The air monitor foam gun can be connected with the fire hose interface through the pipe tooth interface. It mixes with foam liquid through fire pressure, and inhales air to produce air foam. Air gun foam gun is generally used with foam plug, and can also be used on foam truck.

空气炮泡沫枪用于扑灭机器处所、锅炉等油类和易燃液体火灾，也可用于喷水扑灭一般火灾。固体物质着火。

The air monitor foam gun is used to extinguish oil and flammable liquid fires in machine spaces, boilers, etc., and can also be used to spray water to extinguish general fires. Ignition of solid substances.

1、空气泡沫枪配备3%/6%泡沫液。喷涂时，泡沫应顺风喷涂，避免测风和逆风喷涂。消防泵应配备泡沫比例混合器，以按规定的比例输送泡沫混合物。空气泡沫枪的工作压力是指泡沫枪进水端的水流压力；

1. The air foam gun is equipped with 3%/6% foam liquid. During spraying, foam shall be sprayed downwind to avoid wind measurement and upwind spraying. The fire pump shall be equipped with a foam proportioner to deliver the foam mixture in the specified proportions. The working pressure of the air foam gun refers to the water flow pressure at the water inlet end of the foam gun;

2.空气泡沫枪必须经常检查和维护枪身、手轮、枪管、喷嘴、喷嘴接口和密封件的完整性和易用性。尽量避免碰撞和撞击，以免损坏或影响使用，造成不必要的损失。使用后，应将各部件清洗干净，置于阴凉干燥处；

2. the air foam gun must always check and maintain the integrity and ease of use of the gun body, hand wheel, gun barrel, nozzle, nozzle interface and seals. Try to avoid collision and impact, so as not to damage or affect the use and cause unnecessary losses. After use, all parts shall be cleaned and placed in a cool and dry place;

3、平时不要与酸碱等化学品混用，远离热源，防止橡胶件和高压聚乙烯稀释件老化变形。在运输和储存过程中，避免重压、冲击、雨淋、暴晒和接触腐蚀性化学品。

3. Do not mix with acid-base and other chemicals at ordinary times. Keep away from heat sources to prevent aging and deformation of rubber parts and high-pressure polyethylene diluents. During transportation and storage, avoid heavy pressure, impact, rain, sun exposure and contact with corrosive chemicals.

4、使用时，操作者应握紧喷枪手轮，逐渐增加供水压力，不能超过工作压力范围（即喷枪进水端的工作压力），以便避免因突然的冲击或过大的压力而对操作者造成伤害。

4. During use, the operator shall hold the shotgun wheel tightly and gradually increase the water supply pressure, which shall not exceed the working pressure range (i.e. the working pressure at the water inlet end of the shotgun), so as to avoid injury to the operator due to sudden impact or excessive pressure.

5、川消空气炮泡沫枪使用清水，不能扑灭带电设备火灾。使用时应将启闭板拉到位，否则会影响性能。空气炮泡沫枪的泡沫或水的范围在不同的原理下是不同的。每次使用后都应清洗。

5. The foam gun of Chuanxiao air cannon uses clean water, which cannot extinguish the fire of live equipment. The hoist plate shall be pulled in place during use, otherwise the performance will be affected. The range of foam or water of air gun foam gun is different under different principles. Clean after each use.

以上就是关于空气泡沫枪的相关介绍。希望通过以上内容，您可以对空气泡沫枪有一个更好的了解。您可以关注我们的网站www.cx-fire.com，了解更多设备。

The above is about the air foam gun. I hope you can have a better understanding of the air foam gun through the above contents. You can follow our website www.cx-fire Com to learn more about devices.