川消灭火器按其移动形式可分为几种
来源：http://www.cx-fire.com/ 日期：2022-10-15
灭火器按其移动形式可分为几种呢？
川消小编提醒您可分为两种，即手提式灭火器、推车式灭火器。这两种灭火器都属于便携式的消防设备，在建筑、医疗、生活等多领域都是常备的。它们也有不同的类型，主要是根据内部填充剂来分类，灭火剂不同的话，操作方式和使用范围都是不一样，因此须根据使用场合，来选择适合的灭火器。
How many types of fire extinguishers can be classified according to their moving forms? Chuanxiao Xiaobian reminds you that there are two types, namely portable fire extinguisher and wheeled fire extinguisher. These two types of fire extinguishers belong to portable fire fighting equipment and are commonly available in construction, medical treatment, life and other fields. They also have different types, which are mainly classified according to the internal fillers. If the fire extinguishing agents are different, the operation mode and scope of use are different. Therefore, suitable fire extinguishers must be selected according to the use occasion.
1.灭火器在输送和防止过程中，应防止倒放、曝晒以及触碰腐蚀性物质。
1. During the transportation and prevention of fire extinguishers, they should be prevented from being placed upside down, exposed to the sun and touching corrosive substances.
2.灭火器的放置温度应保持在零下10℃45℃之间。
2. The placing temperature of fire extinguisher shall be kept between - 10 ℃ and 45 ℃.
3.灭火器放置场地应保持干燥，防止因受潮而发生腐蚀。此外，还要防止阳光曝晒，否则会影响灭火器的日后使用。
3. The fire extinguisher storage site shall be kept dry to prevent corrosion due to moisture. In addition, it is necessary to prevent sunlight exposure, otherwise it will affect the future use of the fire extinguisher.
4.灭火器须根据厂家规定，进行定时检查。
4. The fire extinguisher must be checked regularly according to the manufacturer's regulations.
5.灭火器的压力表无明显的变形、损坏等现象，否则要换新的压力表。
5. The pressure gauge of the fire extinguisher shall be free of obvious deformation, damage, etc., otherwise it shall be replaced with a new one.
6.查看一下压力表指针在哪，若是不在绿区，则说明要充装驱动气体。
6. Check where the pointer of the pressure gauge is. If it is not in the green area, it means that the driving gas should be filled.
7.仔细看下灭火器的喷嘴有无变形、损坏等现象，否则需立即更换新的。
7. Check carefully whether the nozzle of the fire extinguisher is deformed or damaged, or replace it immediately.
8.灭火器的金属件有无明显的损伤、变形、锈蚀等现象，否则需立即更换。
8. Whether the metal parts of the fire extinguisher are obviously damaged, deformed, rusted, etc., or they need to be replaced immediately.
9.筒体或筒底发生变形、锈蚀等现象的，须采取报废处理。
9. In case of deformation, corrosion and other phenomena of the cylinder or bottom, it shall be scrapped.
10.橡胶和塑料件无明显变形、褪色或断裂，否则需要立即更换。
10. The rubber and plastic parts shall be free of obvious deformation, fading or fracture, otherwise they shall be replaced immediately.
11.对于机构不合格的，须进行报废处理。
11. The unqualified institutions must be scrapped.
After reading the above introduction, I believe you have a further understanding of the types of fire extinguishers according to their moving forms. For more information, please continue to follow our website http://www.cx-fire.com/ More wonderful content will be presented later.
