自动消防水炮也称（自动跟踪定位射流灭火装置），其将红外传感技术、信号处理技术、通讯控制技术、计算机技术和机械传动技术有机地结合在一起，能自动监测保护范围内的火灾。川消小编为您讲解更为详细的内容。

The automatic fire water monitor is also called (automatic tracking and positioning jet extinguishing device). It combines infrared sensing technology, signal processing technology, communication control technology, computer technology and mechanical transmission technology organically, and can automatically monitor the fire within the protection range. Sichuan Xiaobian will explain more details for you.

一旦发生火灾，灭火装置立即启动，对火源进行水平方向和垂直方向的智能扫描，确定火源的两个方位后，控制器发出指令，发出火警信号，同时启动水泵，打开阀门，灭火装置对准火源进行射水灭火，火源扑灭后，控制器再发出指令停止射水。若有新的火源，灭火装置将重复上述过程，待全部火源被扑灭后重新回到监控状态。

In case of a fire, the fire extinguishing device will be started immediately, and the fire source will be scanned in the horizontal and vertical directions. After the two directions of the fire source are determined, the central controller will issue a command to send a fire alarm signal. At the same time, the water pump will be started, the valve will be opened, and the fire extinguishing device will aim at the fire source for water spraying to extinguish the fire. After the fire source is extinguished, the central controller will issue a command to stop water spraying. If there is a new fire source, the fire extinguishing device will repeat the above process and return to the monitoring state after all fire sources are extinguished.

1、采用双波段红外紫外复合探测技术，发现火情早、准确率高、范围广、无盲点；

1. The dual band infrared ultraviolet composite detection technology is adopted to find the fire early, with high accuracy, wide range and no blind spots;

2、可对火源位置进行定点、定位喷水灭火，扑灭早期火灾效率高；

2. The fire source can be fixed at a fixed point and sprayed with water to extinguish the early fire with high efficiency;

3、现场可通过485总线手动控制灭火装置喷嘴的射水方向；

3. The spray direction of the nozzle of the fire extinguishing device can be manually controlled on site through 485 bus;

4、采用总线制图像传输技术，结合现场彩色图像信号进行远程人工手动控制；

4. The bus system image transmission technology is adopted to carry out remote manual control combining with on-site color image signals;

5、采用激光照射原理，可实现无需射水即可检测灭火装置射水是否准确；

5. The principle of laser irradiation can be used to detect whether the fire extinguishing device sprays water accurately without spraying water;

6、满足国标规定的手动、自动及远程手动三种控制方式；

6. Meet the three control modes of manual, automatic and remote manual specified in the national standard;

7、总线制通讯，耗材少，方便施工，维护简单方便；

7. Bus system communication, less consumables, convenient construction and maintenance;

8、二次寻的、无需复位，大大缩短了灭火时间；

8. Second search, no need to reset, greatly reducing the fire fighting time;

9、可接收其他任何厂家的火灾自动报警系统的联动信号；

9. It can receive the linkage signal of the automatic fire alarm system from any other manufacturer;

10、重量轻，外形尺寸紧凑，大方美观；

10. Light weight, compact size, generous and beautiful;

11、符合国标GB25204-2010《自动跟踪定位射流灭火系统》的要求。

11. It meets the requirements of the national standard GB25204-2010 Automatic Tracking and Positioning Jet Fire Extinguishing System.

自动消防水炮的探测优势如何？问题的相关内容在以上就给大家讲解完毕了，您对此有什么相关的问题或者需求，都可以直接来我们网站http://www.cx-fire.com进行咨询吧！

What are the detection advantages of automatic fire water monitor? The relevant content of the question has been explained to everyone above. If you have any related questions or needs, you can come to our website directly http://www.cx-fire.com Consult!