The electronically controlled fire water monitor itself does not have a fire detection system and alarm system. The fire water monitor that cannot realize automatic positioning can control its action through the controller. Solid fire can be put out while spraying water column; Spray water mist can be used to cool the fire site and put out fire and rescue.

电控消防水炮，采用直流电驱动，控制方式采用有线控制和无线遥控，使操作者可以直接控制水炮的射水角度，从而很好地保护灭火人员的人身。

The electric control fire water monitor adopts DC drive, and the control mode adopts wired control and wireless remote control, so that the operator can directly control the water injection angle of the water monitor, so as to protect the personal safety of fire fighters.

如现场工作人员不能控制消防炮进行灭火的情况。当火灾发生后，当火灾情况可控，火势不大时，可利用消防炮无线遥控器将1、2门消防炮对准火点对准火点，开动电动阀和消防泵以实施灭火；如员工不能迅速取下遥控器，也可透过现场的手动控制箱，将1门或2门消防炮对准火点。

If the on-site staff cannot control the fire monitor to extinguish the fire. After the fire, when the fire situation is controllable and the fire is not serious, use the wireless remote control of fire monitor to align 1 and 2 fire monitors with the fire point, and start the electric valve and fire pump to extinguish the fire; If the employee cannot quickly remove the remote control, he can also aim one or two fire monitors at the fire point through the on-site manual control box.

起动电动阀和消防泵进行灭火。若现场有火情危险、火势大、员工无法接近手动控制箱时，员工可前往消防控制中心。这就是电控水炮的有线控制和无线遥控灭火方式，当然如果大家还有不明白的地方，也可以咨询威特消防厂家的技术人员来得到答案。

Start the electric valve and fire pump to extinguish the fire. If there is a fire danger on the site, the fire is large, and the employees cannot access the manual control box, the employees can go to the fire control center. This is the wired control and wireless remote control fire extinguishing method of the electric water monitor. Of course, if you still don't understand, you can also consult the technicians of Witt fire fighting manufacturer to get the answer.

正规消防产品表面及包装应有清晰、耐久的标志，包括产品标志和质量检验标志(合格证)。

The surface and package of regular fire-fighting products shall have clear and durable marks, including product marks and quality inspection marks (certificate of conformity).

产品标志应包括制造厂名厂址、产品名称、产品型号(规格)、主要技术系数、产品商标、生产日期及产品编号、执行标准代号。质量检验标志应包括检验员及合格标志。

The product mark shall include the name and address of the manufacturer, product name, product model (specification), main technical coefficient, product trademark, production date, product number and executive standard code. The quality inspection mark shall include inspector and qualification mark.

假冒伪劣产品外观标志往往模糊粗糙，内容不全，不耐久。如假冒消火栓阀体上的商标铸造模糊不清;接口上无规格型号标志;消防水带不标"消防"二字，故意混淆等。

The appearance marks of fake and shoddy products are often vague and rough, incomplete and durable. If the trademark on the fake fire hydrant valve body is blurred; There is no specification and model mark on the interface; The fire hose is not marked with the word "fire" and is deliberately confused.

标识也是很重要的，工厂内的消防器材设备，常被其他物品遮住，这势必延误去用的时机，所以，在放置这些消防器材的地方，设立一个挑高的标志看板，来增加其能见度。还有一点要注意，就是要看看消防器材内的药剂的有效期限是否逾期，而且，按时更新，确保灭火器的有效性。

Signs are also very important. The fire-fighting equipment in the factory is often covered by other items, which is bound to delay the time to use. Therefore, a high sign board shall be set up in the place where these fire-fighting equipment are placed to increase its visibility. Another point to pay attention to is to see whether the validity period of the agent in the fire-fighting equipment is overdue, and update it on time to ensure the effectiveness of the fire extinguisher.

以上就是今天小编带给大家的精彩内容，更多精彩内容请点击我们的网站：川消http://www.cx-fire.com

The above is the wonderful content brought to you by today's Xiaobian. For more wonderful content, please click our website: Chuanxiao http://www.cx-fire.com