由于受探测距离远、范围大、环境复杂等因素的影响，传统火灾探测器无法有效探测火灾的发生。而图像火灾探测器是一种具有综合火灾探测和视频监控双重功能的新型火灾探测器，适用于室外和大空间火灾探测。那么图像消防炮探测器需要和报警主机进行联动吗？

Due to the influence of factors such as long detection distance, large range and complex environment, the traditional fire detector can not effectively detect the occurrence of fire. Image fire detector is a new type of fire detector with dual functions of comprehensive fire detection and video monitoring, which is suitable for outdoor and large space fire detection. Does the image fire monitor detector need to be linked with the alarm host?

图像火灾探测器是一种具有空间和时间分辨率探测能力的成像探测器。可以从不同角度（火焰的光学特性、形状、跳动频率、变化趋势等）进行分析，综合运用神经网络、模拟数学、计算语义等理论来判断火焰，具有非接触检测的特点。

Image fire detector is an imaging detector with spatial and temporal resolution. The flame can be analyzed from different angles (optical characteristics, shape, beating frequency, change trend, etc.) and judged by using neural network, simulation mathematics, computational semantics and other theories. It has the characteristics of non-contact detection.

不受空间高度、高温、爆炸、有毒等环境条件的限制。采用的智能图像分析技术，可采集并分析现场视频，快速识别火焰并生成火警，支持现场监控、视频和取证，大大提高火警的准确率和响应速度，有效避免各种环境背景干扰因素。

It is not limited by space height, high temperature, explosion, toxicity and other environmental conditions. Using advanced intelligent image analysis technology, it can collect and analyze on-site video, quickly identify fire and generate fire alarm, support on-site monitoring, video and evidence collection, greatly improve the accuracy and response speed of fire alarm, and effectively avoid various environmental background interference factors.

图像火灾探测器安装在火灾监控现场，采集现场视频图像，通过专用视频电缆传输到图像火灾探测系统主机。主机管理软件对实况视频图像进行分析识别。根据火焰或烟雾的独特特性，管理软件进行火警识别，发出火警信号。

The image fire detector is installed at the fire monitoring site, collects the on-site video image, and transmits it to the host of the image fire detection system through a special video cable. The host management software analyzes and recognizes the live video image. According to the unique characteristics of flame or smoke, the management software identifies the fire alarm and sends out the fire alarm signal.

我们都知道图像型火灾探测器是能够集火灾探测和视频为一体，我们可以直接看到探测器的定位全过程，精准的判断出火灾位置，从而进行灭火。虽然图像型火灾探测器是拥有独立的报警设备，但是这也属于报警系统中的一项，所以图像型火灾探测器还是需要和报警主机进行联动的。

We all know that the image fire detector can integrate fire detection and video. We can directly see the whole process of detector positioning and accurately judge the fire location, so as to put out the fire. Although the image fire detector has independent alarm equipment, it also belongs to the alarm system, so the image fire detector still needs to be linked with the alarm host.

那么川消图像型火灾探测器是怎样和报警主机联动的呢？是不是也像自动消防炮一样，需要在自动消防炮和报警主机之间用信号线连接呢？正常来说图像型火灾探测器和报警主机是有联动功能的，这是也是需要在图像型火灾探测器和报警主机用一组信号线加上模块就能实现联动。这样的好处在于，图像型火灾探测器的主机能够分辨每一台的探测器的报警情况，同时也能够进行每一台探测器的画面检测。

So how does Chuanxiao image fire detector interact with the alarm host? Is it necessary to connect the automatic fire monitor and the alarm host with a signal line like the automatic fire monitor? Normally, the image fire detector and alarm host have linkage function, which requires a group of signal lines and modules between the image fire detector and alarm host to realize linkage. The advantage of this is that the host of image fire detector can distinguish the alarm situation of each detector and detect the picture of each detector at the same time.

使用图像火灾探测器可以检测火灾情况，快速识别火焰并产生火花警报，对火灾救援很有帮助，可以提醒人们及时撤离，大限度地减少人身伤害。如果及时发现火灾，可以及时扑灭小火，避免大火造成不可挽回的损失。更多详细相关内容就来网站www.cx-fire.com进行咨询吧！

The use of image fire detector can detect the fire situation, quickly identify the flame and generate spark alarm, which is very helpful for fire rescue, remind people to evacuate in time and reduce personal injury to a great extent. If the fire is found in time, the small fire can be put out in time to avoid irreparable losses caused by the fire. For more details, please visit www.cx-fire.com Com for consultation!